News
It has been one week since we started shipping, and some customers with air shipping have already received their printers. I know the feeling of anxiously waiting for a new printer and seeing others who have received theirs already posting their prints. With that in mind, we would like to
News
Our sales team is wrapping up everything from the Kickstarter and confirming addresses as I write this. The long-awaited shipments will begin next week, and some backers with airmail shipping will receive their printers in that same week. Here is the detailed list of what we are going to do
News
In the last few days, on various occasions, we were asked the same question, "Is the system open or closed?" People showed their concern about the RFID for our filament, on the slicer, on the proprietary hot end, and also on the seemingly new firmware. This is actually
News
WHY DO WE USE A PROPRIETARY HOTEND IN THE FIRST PLACE? 1. We need to make integration as compact as possible to save space for the Lidar.2. We want to reduce the mass of the toolhead to improve speed.3. We want to reduce the thermal inertial (thermal capacity)
News
This is the picture of the first five crews of the gang. It was taken during our first retreat, when five of us had a 3 day long intensive technical discussion and laid down the architecture of Bambu Lab X1, including the Lidar, CoreXY structure, multi-material approach, and embedded software
News
1. Does X1 support third party filaments? Yes. X1 is compatible to filaments with 1.75 mm diamter. AMS supports most third party 1 KG/spool filaments on the market, which have a diameter of around 200 mm and a thickless around 70 mm. AMS does not support TPU officially
News
Color 3D printing is one of the few logical reasons that we chose a 3D printer as our project. In the early days, we thought, naively and bravely, that we could have a full color printer in 18 months that eclipses any other printers. The demand is so obvious; single
News
Hello world! It feels so refreshing to resurface after 20 months in stealth mode! In 2020, a few colleagues/friends and I were tired of complaining and whining and finally decided to assemble a gang to do something by ourselves. "This is my last chance to do something great